A method to deliver patterned electrical impulses to Schwann cells cultured on an artificial axon

Antonio Merolli, Yong Mao, Gregory Voronin, Joseph Steele, N. Murthy, Joachim Kohn

Research output: Contribution to journalArticle

Abstract

Information from the brain travels back and forth along peripheral nerves in the form of electrical impulses generated by neurons and these impulses have repetitive patterns. Schwann cells in peripheral nerves receive molecular signals from axons to coordinate the process of myelination. There is evidence, however, that non-molecular signals play an important role in myelination in the form of patterned electrical impulses generated by neuronal activity. The role of patterned electrical impulses has been investigated in the literature using co-cultures of neurons and myelinating cells. The co-culturing method, however, prevents the uncoupling of the direct effect of patterned electrical impulses on myelinating cells from the indirect effect mediated by neurons. To uncouple these effects and focus on the direct response of Schwann cells, we developed an in vitro model where an electroconductive carbon fiber acts as an artificial axon. The fiber provides only the biophysical characteristics of an axon but does not contribute any molecular signaling. In our 'suspended wire model', the carbon fiber is suspended in a liquid media supported by a 3D printed scaffold. Patterned electrical impulses are generated by an Arduino 101 microcontroller. In this study, we describe the technology needed to set-up and eventually replicate this model. We also report on our initial in vitro tests where we were able to document the adherence and ensheath of human Schwann cells to the carbon fiber in the presence of patterned electrical impulses (hSCs were purchased from ScienCell Research Laboratories, Carlsbad, CA, USA; ScienCell fulfills the ethic requirements, including donor's consent). This technology will likely make feasible to investigate the response of Schwann cells to patterned electrical impulses in the future.

Original languageEnglish (US)
Pages (from-to)1052-1059
Number of pages8
JournalNeural Regeneration Research
Volume14
Issue number6
DOIs
StatePublished - Jun 1 2019

Fingerprint

Schwann Cells
Axons
Peripheral Nerves
Neurons
Technology
Coculture Techniques
Ethics
Brain
Research
carbon fiber
In Vitro Techniques

All Science Journal Classification (ASJC) codes

  • Developmental Neuroscience

Cite this

Merolli, Antonio ; Mao, Yong ; Voronin, Gregory ; Steele, Joseph ; Murthy, N. ; Kohn, Joachim. / A method to deliver patterned electrical impulses to Schwann cells cultured on an artificial axon. In: Neural Regeneration Research. 2019 ; Vol. 14, No. 6. pp. 1052-1059.
@article{912c08303c5349e298b0c3bed3cf3978,
title = "A method to deliver patterned electrical impulses to Schwann cells cultured on an artificial axon",
abstract = "Information from the brain travels back and forth along peripheral nerves in the form of electrical impulses generated by neurons and these impulses have repetitive patterns. Schwann cells in peripheral nerves receive molecular signals from axons to coordinate the process of myelination. There is evidence, however, that non-molecular signals play an important role in myelination in the form of patterned electrical impulses generated by neuronal activity. The role of patterned electrical impulses has been investigated in the literature using co-cultures of neurons and myelinating cells. The co-culturing method, however, prevents the uncoupling of the direct effect of patterned electrical impulses on myelinating cells from the indirect effect mediated by neurons. To uncouple these effects and focus on the direct response of Schwann cells, we developed an in vitro model where an electroconductive carbon fiber acts as an artificial axon. The fiber provides only the biophysical characteristics of an axon but does not contribute any molecular signaling. In our 'suspended wire model', the carbon fiber is suspended in a liquid media supported by a 3D printed scaffold. Patterned electrical impulses are generated by an Arduino 101 microcontroller. In this study, we describe the technology needed to set-up and eventually replicate this model. We also report on our initial in vitro tests where we were able to document the adherence and ensheath of human Schwann cells to the carbon fiber in the presence of patterned electrical impulses (hSCs were purchased from ScienCell Research Laboratories, Carlsbad, CA, USA; ScienCell fulfills the ethic requirements, including donor's consent). This technology will likely make feasible to investigate the response of Schwann cells to patterned electrical impulses in the future.",
author = "Antonio Merolli and Yong Mao and Gregory Voronin and Joseph Steele and N. Murthy and Joachim Kohn",
year = "2019",
month = "6",
day = "1",
doi = "10.4103/1673-5374.250626",
language = "English (US)",
volume = "14",
pages = "1052--1059",
journal = "Neural Regeneration Research",
issn = "1673-5374",
publisher = "Editorial Board of Neural Regeneration Research",
number = "6",

}

A method to deliver patterned electrical impulses to Schwann cells cultured on an artificial axon. / Merolli, Antonio; Mao, Yong; Voronin, Gregory; Steele, Joseph; Murthy, N.; Kohn, Joachim.

In: Neural Regeneration Research, Vol. 14, No. 6, 01.06.2019, p. 1052-1059.

Research output: Contribution to journalArticle

TY - JOUR

T1 - A method to deliver patterned electrical impulses to Schwann cells cultured on an artificial axon

AU - Merolli, Antonio

AU - Mao, Yong

AU - Voronin, Gregory

AU - Steele, Joseph

AU - Murthy, N.

AU - Kohn, Joachim

PY - 2019/6/1

Y1 - 2019/6/1

N2 - Information from the brain travels back and forth along peripheral nerves in the form of electrical impulses generated by neurons and these impulses have repetitive patterns. Schwann cells in peripheral nerves receive molecular signals from axons to coordinate the process of myelination. There is evidence, however, that non-molecular signals play an important role in myelination in the form of patterned electrical impulses generated by neuronal activity. The role of patterned electrical impulses has been investigated in the literature using co-cultures of neurons and myelinating cells. The co-culturing method, however, prevents the uncoupling of the direct effect of patterned electrical impulses on myelinating cells from the indirect effect mediated by neurons. To uncouple these effects and focus on the direct response of Schwann cells, we developed an in vitro model where an electroconductive carbon fiber acts as an artificial axon. The fiber provides only the biophysical characteristics of an axon but does not contribute any molecular signaling. In our 'suspended wire model', the carbon fiber is suspended in a liquid media supported by a 3D printed scaffold. Patterned electrical impulses are generated by an Arduino 101 microcontroller. In this study, we describe the technology needed to set-up and eventually replicate this model. We also report on our initial in vitro tests where we were able to document the adherence and ensheath of human Schwann cells to the carbon fiber in the presence of patterned electrical impulses (hSCs were purchased from ScienCell Research Laboratories, Carlsbad, CA, USA; ScienCell fulfills the ethic requirements, including donor's consent). This technology will likely make feasible to investigate the response of Schwann cells to patterned electrical impulses in the future.

AB - Information from the brain travels back and forth along peripheral nerves in the form of electrical impulses generated by neurons and these impulses have repetitive patterns. Schwann cells in peripheral nerves receive molecular signals from axons to coordinate the process of myelination. There is evidence, however, that non-molecular signals play an important role in myelination in the form of patterned electrical impulses generated by neuronal activity. The role of patterned electrical impulses has been investigated in the literature using co-cultures of neurons and myelinating cells. The co-culturing method, however, prevents the uncoupling of the direct effect of patterned electrical impulses on myelinating cells from the indirect effect mediated by neurons. To uncouple these effects and focus on the direct response of Schwann cells, we developed an in vitro model where an electroconductive carbon fiber acts as an artificial axon. The fiber provides only the biophysical characteristics of an axon but does not contribute any molecular signaling. In our 'suspended wire model', the carbon fiber is suspended in a liquid media supported by a 3D printed scaffold. Patterned electrical impulses are generated by an Arduino 101 microcontroller. In this study, we describe the technology needed to set-up and eventually replicate this model. We also report on our initial in vitro tests where we were able to document the adherence and ensheath of human Schwann cells to the carbon fiber in the presence of patterned electrical impulses (hSCs were purchased from ScienCell Research Laboratories, Carlsbad, CA, USA; ScienCell fulfills the ethic requirements, including donor's consent). This technology will likely make feasible to investigate the response of Schwann cells to patterned electrical impulses in the future.

UR - http://www.scopus.com/inward/record.url?scp=85061837221&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85061837221&partnerID=8YFLogxK

U2 - 10.4103/1673-5374.250626

DO - 10.4103/1673-5374.250626

M3 - Article

VL - 14

SP - 1052

EP - 1059

JO - Neural Regeneration Research

JF - Neural Regeneration Research

SN - 1673-5374

IS - 6

ER -