Design and validation of a passive deposition sampler

Stephanie A. Einstein, Chang Ho Yu, Gediminas Mainelis, Lung Chi Chen, Clifford P. Weisel, Paul J. Lioy

Research output: Contribution to journalArticlepeer-review

5 Scopus citations

Abstract

A new, passive particle deposition air sampler, called the Einstein-Lioy Deposition Sampler (ELDS), has been developed to fill a gap in passive sampling for near-field particle emissions. The sampler can be configured in several ways: with a protective hood for outdoor sampling, without a protective hood, and as a dust plate. In addition, there is an XRF-ready option that allows for direct sampling onto a filter-mounted XRF cartridge which can be used in conjunction with all configurations. A wind tunnel was designed and constructed to test the performance of different sampler configurations using a test dust with a known particle size distribution. The sampler configurations were also tested versus each other to evaluate whether or not the protective hood would affect the collected particle size distribution. A field study was conducted to test the sampler under actual environmental conditions and to evaluate its ability to collect samples for chemical analysis. Individual experiments for each configuration demonstrated precision of the sampler. The field experiment demonstrated the ability of the sampler to both collect mass and allow for the measurement of an environmental contaminant i.e. Cr6+. The ELDS was demonstrated to be statistically not different for Hooded and Non-Hooded models, compared to each other and the test dust; thus, it can be used indoors and outdoors in a variety of configurations to suit the user's needs.

Original languageEnglish (US)
Pages (from-to)2411-2420
Number of pages10
JournalJournal of Environmental Monitoring
Volume14
Issue number9
DOIs
StatePublished - Sep 2012

All Science Journal Classification (ASJC) codes

  • Public Health, Environmental and Occupational Health
  • Management, Monitoring, Policy and Law

Fingerprint Dive into the research topics of 'Design and validation of a passive deposition sampler'. Together they form a unique fingerprint.

Cite this