Infrared transmissive, hollow plastic waveguides with inner Ag-Agl coatings

Roshan George, James A. Harrington

Research output: Contribution to journalArticlepeer-review

60 Scopus citations

Abstract

Hollow polycarbonate waveguides with thin-film coatings of Ag-AgI were fabricated by liquid-phase chemistry methods. These hollow waveguides, which have bore sizes ranging from 500 to 2000 μm and lengths as long as 2 m, are transmissive from 2 to more than 20 μm. The lowest loss of 0.02 dB/m was obtained for a straight 2000 μm bore guide at 10.6 μm. This is to our knowledge the lowest loss measured for any IR fiber at CO2 laser wavelengths. The bending losses were found to increase as 1/R, where R is the radius of the bend. These waveguides were able to withstand 18 W of CO 2 laser input power for bore sizes greater than 1000 μm.

Original languageEnglish (US)
Pages (from-to)6449-6455
Number of pages7
JournalApplied Optics
Volume44
Issue number30
DOIs
StatePublished - Oct 20 2005

All Science Journal Classification (ASJC) codes

  • Atomic and Molecular Physics, and Optics
  • Engineering (miscellaneous)
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Infrared transmissive, hollow plastic waveguides with inner Ag-Agl coatings'. Together they form a unique fingerprint.

Cite this