Machinability for dry turning of laser cladded parts with conventional vs. wiper insert

P. R. Zhang, Z. Q. Liu, Y. B. Guo

Research output: Contribution to journalArticlepeer-review

16 Scopus citations

Abstract

Laser cladding has been developed for rapid manufacturing of complex and functional parts. The process chain combining both laser cladding and machining is necessary when a laser cladded part requires high precision and surface integrity. Turning with the conventional cutting insert to machine laser cladded part is time consuming and generates average surface integrity. In this paper, the machinability for dry turning of laser cladded parts with wiper vs. conventional inserts is investigated. The experimental results show that both material removal rate (MRR) and machined surface finish can be improved by using the wiper insert. An innovative model has been developed using the Monte Carlo method to predict MRR. The key advantage by combining laser cladding and turning is to produce both high surface quality and high MRR when a wiper insert is used as finish cutting tool. However, rapid tool wear and built-up-edge (BUE) are prone to occur in turning with the wiper inserts, which leads to tensile residual stress on the machined surface. This research will provide insights to determine an optimal process window of the hybrid laser cladding-turning for functional surfaces.

Original languageEnglish (US)
Pages (from-to)494-499
Number of pages6
JournalJournal of Manufacturing Processes
Volume28
DOIs
StatePublished - Aug 2017
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Strategy and Management
  • Management Science and Operations Research
  • Industrial and Manufacturing Engineering

Keywords

  • Dry turning
  • Machinability
  • Material removal rate
  • Remanufacturing
  • Wiper insert

Fingerprint

Dive into the research topics of 'Machinability for dry turning of laser cladded parts with conventional vs. wiper insert'. Together they form a unique fingerprint.

Cite this