Process simulations for 3D turning using uniform and variable microgeometry PCBN tools

Y. Karpat, T. Özel

Research output: Contribution to journalArticlepeer-review

9 Scopus citations

Abstract

In this paper, uniform and variable edge microgeometry design inserts are utilised and tested for 3D turning process. In 3D tool engagement with workpiece, thickness of the chip varies from a maximum equal to the feed rate (at primary cutting edge) to a minimum on the tool's corner radius (at trailing cutting edge). The ideal tool edge preparation should posses a variable configuration which has larger edge radius at the primary cutting edge than at the trailing cutting edge. Here the key parameter is the ratio of uncut chip thickness to edge radius. If a proper ratio is chosen for given cutting conditions, a variable cutting edge along the corner radius can be designed or 'engineered'. In this study, Finite Element Modelling (FEM)-based 3D process simulations are utilised to predict forces and temperatures on various uniform and variable edge microgeometry tools. Predicted forces are compared with experiments. The temperature distributions on the tool demonstrate the advantages of variable edge microgeometry design.

Original languageEnglish (US)
Pages (from-to)26-38
Number of pages13
JournalInternational Journal of Machining and Machinability of Materials
Volume4
Issue number1
DOIs
StatePublished - 2008

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Keywords

  • 3D turning
  • FEM
  • Finite element modelling
  • Variable microedge geometry tool design

Fingerprint Dive into the research topics of 'Process simulations for 3D turning using uniform and variable microgeometry PCBN tools'. Together they form a unique fingerprint.

Cite this