Residual stress and fatigue properties of AISI H13 steel by sustainable dry milling

W. Li, Yuebin Guo

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Dry machining is a cluster of sustainable manufacturing processes to eliminate the negative environmental effect of machining coolants. It is critical to ensure that product quality cannot be sacrificed for achieving sustainability. The progress of tool flank wear during hard milling adversely affects surface integrity and, therefore, fatigue life of machined components. This paper focuses on the influence of tool flank wear on residual stress and fatigue properties in dry end milling AISI H13 tool steel (50 ± 1 HRC) using PVD coated tools. The effects of flank wear (VB = 0, 0.1, and 0.2 mm) on residual stresses at three different feeds were studied. Four-point bending fatigue tests were performed on the samples machined at five levels of tool flank wears (VB = 0, 0.05, 0.10, 0.15, 0.20 mm) and surface fatigue initiations of the fatigued samples were identified by the fractographic method.

Original languageEnglish (US)
Title of host publicationASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conf. and in Participation with the Int. Conf., MSEC 2012
Pages1133-1139
Number of pages7
DOIs
StatePublished - Dec 1 2012
Externally publishedYes
EventASME 2012 International Manufacturing Science and Engineering Conference, MSEC 2012 Collocated with the 40th North American Manufacturing Research Conference and in Participation with the International Conference - Notre Dame, IN, United States
Duration: Jun 4 2012Jun 8 2012

Publication series

NameASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012

Other

OtherASME 2012 International Manufacturing Science and Engineering Conference, MSEC 2012 Collocated with the 40th North American Manufacturing Research Conference and in Participation with the International Conference
CountryUnited States
CityNotre Dame, IN
Period6/4/126/8/12

Fingerprint

Milling (machining)
Residual stresses
Wear of materials
Fatigue of materials
Steel
Machining
Tool steel
Physical vapor deposition
Coolants
Environmental impact
Sustainable development

All Science Journal Classification (ASJC) codes

  • Industrial and Manufacturing Engineering

Cite this

Li, W., & Guo, Y. (2012). Residual stress and fatigue properties of AISI H13 steel by sustainable dry milling. In ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conf. and in Participation with the Int. Conf., MSEC 2012 (pp. 1133-1139). (ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012). https://doi.org/10.1115/MSEC2012-7363
Li, W. ; Guo, Yuebin. / Residual stress and fatigue properties of AISI H13 steel by sustainable dry milling. ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conf. and in Participation with the Int. Conf., MSEC 2012. 2012. pp. 1133-1139 (ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012).
@inproceedings{56f2f72f85c84e439137d6723f5a4cb1,
title = "Residual stress and fatigue properties of AISI H13 steel by sustainable dry milling",
abstract = "Dry machining is a cluster of sustainable manufacturing processes to eliminate the negative environmental effect of machining coolants. It is critical to ensure that product quality cannot be sacrificed for achieving sustainability. The progress of tool flank wear during hard milling adversely affects surface integrity and, therefore, fatigue life of machined components. This paper focuses on the influence of tool flank wear on residual stress and fatigue properties in dry end milling AISI H13 tool steel (50 ± 1 HRC) using PVD coated tools. The effects of flank wear (VB = 0, 0.1, and 0.2 mm) on residual stresses at three different feeds were studied. Four-point bending fatigue tests were performed on the samples machined at five levels of tool flank wears (VB = 0, 0.05, 0.10, 0.15, 0.20 mm) and surface fatigue initiations of the fatigued samples were identified by the fractographic method.",
author = "W. Li and Yuebin Guo",
year = "2012",
month = "12",
day = "1",
doi = "10.1115/MSEC2012-7363",
language = "English (US)",
isbn = "9780791854990",
series = "ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012",
pages = "1133--1139",
booktitle = "ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conf. and in Participation with the Int. Conf., MSEC 2012",

}

Li, W & Guo, Y 2012, Residual stress and fatigue properties of AISI H13 steel by sustainable dry milling. in ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conf. and in Participation with the Int. Conf., MSEC 2012. ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012, pp. 1133-1139, ASME 2012 International Manufacturing Science and Engineering Conference, MSEC 2012 Collocated with the 40th North American Manufacturing Research Conference and in Participation with the International Conference, Notre Dame, IN, United States, 6/4/12. https://doi.org/10.1115/MSEC2012-7363

Residual stress and fatigue properties of AISI H13 steel by sustainable dry milling. / Li, W.; Guo, Yuebin.

ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conf. and in Participation with the Int. Conf., MSEC 2012. 2012. p. 1133-1139 (ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Residual stress and fatigue properties of AISI H13 steel by sustainable dry milling

AU - Li, W.

AU - Guo, Yuebin

PY - 2012/12/1

Y1 - 2012/12/1

N2 - Dry machining is a cluster of sustainable manufacturing processes to eliminate the negative environmental effect of machining coolants. It is critical to ensure that product quality cannot be sacrificed for achieving sustainability. The progress of tool flank wear during hard milling adversely affects surface integrity and, therefore, fatigue life of machined components. This paper focuses on the influence of tool flank wear on residual stress and fatigue properties in dry end milling AISI H13 tool steel (50 ± 1 HRC) using PVD coated tools. The effects of flank wear (VB = 0, 0.1, and 0.2 mm) on residual stresses at three different feeds were studied. Four-point bending fatigue tests were performed on the samples machined at five levels of tool flank wears (VB = 0, 0.05, 0.10, 0.15, 0.20 mm) and surface fatigue initiations of the fatigued samples were identified by the fractographic method.

AB - Dry machining is a cluster of sustainable manufacturing processes to eliminate the negative environmental effect of machining coolants. It is critical to ensure that product quality cannot be sacrificed for achieving sustainability. The progress of tool flank wear during hard milling adversely affects surface integrity and, therefore, fatigue life of machined components. This paper focuses on the influence of tool flank wear on residual stress and fatigue properties in dry end milling AISI H13 tool steel (50 ± 1 HRC) using PVD coated tools. The effects of flank wear (VB = 0, 0.1, and 0.2 mm) on residual stresses at three different feeds were studied. Four-point bending fatigue tests were performed on the samples machined at five levels of tool flank wears (VB = 0, 0.05, 0.10, 0.15, 0.20 mm) and surface fatigue initiations of the fatigued samples were identified by the fractographic method.

UR - http://www.scopus.com/inward/record.url?scp=84883108761&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84883108761&partnerID=8YFLogxK

U2 - 10.1115/MSEC2012-7363

DO - 10.1115/MSEC2012-7363

M3 - Conference contribution

SN - 9780791854990

T3 - ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012

SP - 1133

EP - 1139

BT - ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conf. and in Participation with the Int. Conf., MSEC 2012

ER -

Li W, Guo Y. Residual stress and fatigue properties of AISI H13 steel by sustainable dry milling. In ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conf. and in Participation with the Int. Conf., MSEC 2012. 2012. p. 1133-1139. (ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012). https://doi.org/10.1115/MSEC2012-7363