Residual stress profiles in high speed machining and microforming of biodegradable orthopedic implants

M. Salahshoor, Yuebin Guo

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Biodegradable magnesium-calcium alloy is an attractive orthopedic biomaterial compared to permanent metallic alloys. However, the critical issue is that magnesium-calcium alloy corrodes too fast in the human organism. Hook-shaped compressive residual stress profiles, induced by various surface modification techniques in near surface zone, are proven to slower the degradation rate. This guarantees the presence of the implant in-vivo till the metabolic reactions leading to healing are over. The knowledge on how process parameters affect residual stress profiles is fundamental in successfully engineering the implants surface. Majority of surface modification techniques fall into two broad categories of cutting and forming operations. This study investigates the effects of process parameters in high speed face milling, representing a cutting operation, and low plasticity burnishing, as a micro forming process, on residual stress and microhardness profiles.

Original languageEnglish (US)
Title of host publicationASME/STLE 2011 International Joint Tribology Conference, IJTC 2011
Pages31-33
Number of pages3
DOIs
StatePublished - Dec 1 2011
Externally publishedYes
EventASME/STLE 2011 International Joint Tribology Conference, IJTC 2011 - Los Angeles, CA, United States
Duration: Oct 24 2011Oct 26 2011

Publication series

NameAmerican Society of Mechanical Engineers, Tribology Division, TRIB

Conference

ConferenceASME/STLE 2011 International Joint Tribology Conference, IJTC 2011
CountryUnited States
CityLos Angeles, CA
Period10/24/1110/26/11

Fingerprint

Orthopedics
Calcium alloys
Residual stresses
Machining
Magnesium alloys
Surface treatment
Burnishing
Hooks
Milling (machining)
Biocompatible Materials
Compressive stress
Biomaterials
Microhardness
Plasticity
Degradation

All Science Journal Classification (ASJC) codes

  • Mechanical Engineering
  • Materials Science(all)

Cite this

Salahshoor, M., & Guo, Y. (2011). Residual stress profiles in high speed machining and microforming of biodegradable orthopedic implants. In ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011 (pp. 31-33). (American Society of Mechanical Engineers, Tribology Division, TRIB). https://doi.org/10.1115/IJTC2011-61042
Salahshoor, M. ; Guo, Yuebin. / Residual stress profiles in high speed machining and microforming of biodegradable orthopedic implants. ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011. 2011. pp. 31-33 (American Society of Mechanical Engineers, Tribology Division, TRIB).
@inproceedings{a465f1b63fee4ee3acaf413e207ffe40,
title = "Residual stress profiles in high speed machining and microforming of biodegradable orthopedic implants",
abstract = "Biodegradable magnesium-calcium alloy is an attractive orthopedic biomaterial compared to permanent metallic alloys. However, the critical issue is that magnesium-calcium alloy corrodes too fast in the human organism. Hook-shaped compressive residual stress profiles, induced by various surface modification techniques in near surface zone, are proven to slower the degradation rate. This guarantees the presence of the implant in-vivo till the metabolic reactions leading to healing are over. The knowledge on how process parameters affect residual stress profiles is fundamental in successfully engineering the implants surface. Majority of surface modification techniques fall into two broad categories of cutting and forming operations. This study investigates the effects of process parameters in high speed face milling, representing a cutting operation, and low plasticity burnishing, as a micro forming process, on residual stress and microhardness profiles.",
author = "M. Salahshoor and Yuebin Guo",
year = "2011",
month = "12",
day = "1",
doi = "10.1115/IJTC2011-61042",
language = "English (US)",
isbn = "9780791854747",
series = "American Society of Mechanical Engineers, Tribology Division, TRIB",
pages = "31--33",
booktitle = "ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011",

}

Salahshoor, M & Guo, Y 2011, Residual stress profiles in high speed machining and microforming of biodegradable orthopedic implants. in ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011. American Society of Mechanical Engineers, Tribology Division, TRIB, pp. 31-33, ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011, Los Angeles, CA, United States, 10/24/11. https://doi.org/10.1115/IJTC2011-61042

Residual stress profiles in high speed machining and microforming of biodegradable orthopedic implants. / Salahshoor, M.; Guo, Yuebin.

ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011. 2011. p. 31-33 (American Society of Mechanical Engineers, Tribology Division, TRIB).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Residual stress profiles in high speed machining and microforming of biodegradable orthopedic implants

AU - Salahshoor, M.

AU - Guo, Yuebin

PY - 2011/12/1

Y1 - 2011/12/1

N2 - Biodegradable magnesium-calcium alloy is an attractive orthopedic biomaterial compared to permanent metallic alloys. However, the critical issue is that magnesium-calcium alloy corrodes too fast in the human organism. Hook-shaped compressive residual stress profiles, induced by various surface modification techniques in near surface zone, are proven to slower the degradation rate. This guarantees the presence of the implant in-vivo till the metabolic reactions leading to healing are over. The knowledge on how process parameters affect residual stress profiles is fundamental in successfully engineering the implants surface. Majority of surface modification techniques fall into two broad categories of cutting and forming operations. This study investigates the effects of process parameters in high speed face milling, representing a cutting operation, and low plasticity burnishing, as a micro forming process, on residual stress and microhardness profiles.

AB - Biodegradable magnesium-calcium alloy is an attractive orthopedic biomaterial compared to permanent metallic alloys. However, the critical issue is that magnesium-calcium alloy corrodes too fast in the human organism. Hook-shaped compressive residual stress profiles, induced by various surface modification techniques in near surface zone, are proven to slower the degradation rate. This guarantees the presence of the implant in-vivo till the metabolic reactions leading to healing are over. The knowledge on how process parameters affect residual stress profiles is fundamental in successfully engineering the implants surface. Majority of surface modification techniques fall into two broad categories of cutting and forming operations. This study investigates the effects of process parameters in high speed face milling, representing a cutting operation, and low plasticity burnishing, as a micro forming process, on residual stress and microhardness profiles.

UR - http://www.scopus.com/inward/record.url?scp=84862587726&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84862587726&partnerID=8YFLogxK

U2 - 10.1115/IJTC2011-61042

DO - 10.1115/IJTC2011-61042

M3 - Conference contribution

SN - 9780791854747

T3 - American Society of Mechanical Engineers, Tribology Division, TRIB

SP - 31

EP - 33

BT - ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011

ER -

Salahshoor M, Guo Y. Residual stress profiles in high speed machining and microforming of biodegradable orthopedic implants. In ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011. 2011. p. 31-33. (American Society of Mechanical Engineers, Tribology Division, TRIB). https://doi.org/10.1115/IJTC2011-61042